Dress Cat5e and Cat6 cables in half the time!
Easy to use with no more twisted wires and wasted time.
Create professional looking cable bundles in no time.
Release hinge design to quickly add cables to existing bundle.
Ideal for tidying Server rooms, networking closets and patch cables.
Are you looking to bulk purchase this product? If so, please see the below DISCOUNTED quantity breaks!
All quoted prices exclude VAT.
|25||20%||Up to £99.75|
|20||15%||Up to £59.85|
|15||10%||Up to £29.93|
|10||5%||Up to £9.97|
Model = ARC Communications ARC56DT
Type = 24 Way Data Cable Comb
|This innovative data tool allows you to bundle together a 24 cable group. Firstly, neatly arrange the 11 patch cables around the bundle. Then open the tool and snap around the inside 13 patch cables, leaving the outside dress cables hanging in order around the outside. One cable at a time in order, snap all 11 outside dress cables in to the housing slots, being careful not to cross cables. Move the tool up keeping all cables in order as you go. Tie wrap the dress bundle every 15 - 20cm as desired. Continue dressing cables to patch panel, then remove tool.|
|Patchsave supply the UK's widest range of both UTP & FTP patch cables in many different constructions, materials and lengths from an array of industry leading manufacturers and distributors to match your exact cabling system or application standards.|
|Benefit from no more twisted cables or wasted time, Cat5e and Cat6 compatible in a quick release hinge design so you can create professional looking bundles in no time.|
|An essential tool for installers to save time and increase profits. Ideal for both home and commercial use and available for immediate delivery from our local stock.|
|Almost any power, data, voice or fibre cable can be made to order - please call 0845 365 7777 or email email@example.com for pricing and full specification.|
The ARC Data Cable Comb is a 'must have' tool for anybody installing Cat5e and Cat6 cables. It has a hinged design with a quick release, meaning that the Cable Comb can be used to quickly dress the cable bundles in to IT and Communication racks.
Once the cables are placed in to position, the Cable Comb is small enough to follow that same route through the containment (either overhead or under floors) providing a professional looking finish for each bundle, right up to the patch panels. It can also be used with longer length Cat5e and Cat6 patch cables for dressing in to racks and between cable management bars.
The Data Cable Comb can bundle together up to 24 Cat5e or Cat6 cables at a time. The 13 inner cables are put inside the tool, which is then clicked in to place. Next, the remaining 11 cables are pushed in to the outer housing slots, before you can then start to move the Cable Comb along the bundle. It is important that you keep all the Cat5e or Cat6 cables in this order to ensure that great finish.
The bundles are then tie wrapped with Velcro straps every 15 - 20cm. By installing multiple bundles in this way will not only create an aesthetically pleasing installation, also assisting with the heat dissipation.
As the bundles of cable enter each rack the Cable Comb will also assist with a smooth bend radius to meet the required manufacturer cabling standards. This type of installation will provide user friendly identification and management of the system when handed over to the customer.
The ARC56DT Data Cable Comb is easy to use and will reduce your installation time. It can be used across structured installations, server rooms and data centres and is a cost-effective and essential tool, available for next day delivery.
|Product Set||Structured Products|