When C20 inlet is mounted in a piece of equipment take care not to damage the inlet when removing the connector. To remove SecureSleeve that remains in inlet after cord extraction turn off power source and use Non-conductive tool to extract.
Only use with Yung Li or StayOnline brand cords. Don't attempt to use on other brands.
Are you looking to bulk purchase this product? If so, please see the below DISCOUNTED quantity breaks!
All quoted prices exclude VAT.
|100||20%||Up to £170.00|
|50||15%||Up to £63.75|
|25||10%||Up to £21.25|
|10||5%||Up to £4.25|
Colour = 10x Black
Type = IEC C19 Contact Retention
|When mounting IEC320 C19 female connector into an IEC320 C20 male inlet the C19 SecureInsert over-mold will make the connection stronger. Only use with Yung Li or StayOnline brand cords.|
|To properly install the SecureInsert slide over Yung Li or StayOnline brand female connector housing and press firmly onto connector. Fully insert cord to avoid arcing between conductors. Typically, 9 lbs of force pull are required to extract a C19 connector. With C19SecureSleeveTab the average is 30 lbs of force pull to extract a C19 connector. Repeated insertions and extractions may deteriorate the force pounds required to extract a C19 Connector.|
|Local stock item available next day, spend over £85 and receive FOC delivery.|
|Volume order product with 4x discounted 'quantity' breaks for bulk purchases on this product.|
|Almost any Power cable can be made to order from our comprehensive Portfolio - please call 0845 365 7777 or email firstname.lastname@example.org for pricing.|