ID-Scratch is the easy to use 20mm wide 2.5 metre long adhesive system that can be torn off by hand every 3cm. ID-Scratch is available in four colours and can be fastened and detached over 1000 times. The pocket sized dispenser can be refilled with the handy 2 roll refill packs.
High quality cage nuts for fixing securely in to place rack mounted equipment such as. Patch Panels Network Switches Blanking panels Brush strips Cable management bars
2u Letterbox brush panels enable neat routing of cables form the front to rear of data cabinets, helping with air-flow and preventing hot air from re-circulating.
Brush panels enable neat routing of cables form the front to rear of data cabinets, helping with air-flow and preventing hot air from re-circulating.
2U cable management dump panels are the straightforward way for keeping networking cables tidy in data cabinets. The individual fingers and brush strip cable pass through slots, allows you to neatly direct patch cables from the front to rear of cabinets.
19" 2U cable management bar with 100mm rings, enables neat routing of networking cables.
C19 outlet covers simply click in to PDU's to ensure that unauthorized IEC C20 power cables can not be installed. Supplied in packs of 5 and easy to remove with the special removal tool included.
IEC 60320 tolerances are wide so the stability of a connection can be inadvertently separated. When mounting IEC320 C20 plug into an IEC320 C19 outlet the C20 Secure Sleeve Tab over-mold insert will make the connection stronger.
C14 to 2x C13 splitter extension cables allow two pieces of equipment to be powered from one power source. These IEC splitter extensions can plug directly into desktop PC's allowing powering of two monitors; or to connect directly from a Power Distribution Unit (PDU) or UPS to any active hardware and server equipment with C14 outlets.
Some IT equipment including many Cisco appliances use a power cord with a IEC320 C15 socket and a matching IEC320 C16 inlet connector on the appliance. The IEC320 C15 socket will fit the IEC320 C14 inlet but the IEC320 C13 will not fit the IEC320 C16 as the C16 has a plastic block opposite the earth pin preventing IEC320 C13 fitting. IEC320 C15 connectors...
Certain IT equipment have an IEC320 C16 inlet socket and will need a power cable with a IEC320 C15 connector. The C15 female connector has the same pin array as a C13. However, the C15 has a notch at the base designed for plugging into C16 inlets and can also fit C14 installs, while the C13 will only fit C14 inlet. Male plug inserts into a IEC60320...
Certain IT equipment have an IEC320 C16 inlet socket and will need a power cable with a IEC320 C15 connector. The C15 female connector has the same pin array as a C13. However, the C15 has a notch at the base designed for plugging into C16 inlets and can also fit C14 installs, while the C13 will only fit C14 inlet. Male plug inserts into a IEC60320 outlet...
This product is a power cable converter that allows for the conversion of a standard IEC C14 power cable to the common IEC C7 "Figure 8" type connector.
Both 16Amp & 32Amp Commando IEC309 Cables are available from Patchsave. They are commonly used to connect directly from Commando Female connectors that provide power to IT racks and directly in to UPS systems.
IEC C14 to UK socket cables allow for connection of a UK plug to a C13 PDU (power distribution unit) or UPS (uninterruptible power supply)
Certain IT equipment use a power cable with a IEC320 C15 socket and a matching IEC320 C16 inlet connector on the appliance. The C15 female connector has the same pin array as a C13. However, the C15 has a notch at the base designed for plugging into C16 inlets and can also fit C14 installs, while the C13 will only fit C14 inlet. Male plug inserts into a...
Certain IT equipment use a power cord with a IEC320 C15 socket and a matching IEC320 C16 inlet connector on the appliance. The C15 female connector has the same pin array as a C13. However, the C15 has a notch at the base designed for plugging into C16 inlets and can also fit C14 installs, while the C13 will only fit C14 inlet. Male plug inserts into a...
Certain IT equipment use a power cable with a IEC320 C15 socket and a matching IEC320 C16 inlet connector on the appliance. The C15 female connector has the same pin array as a C13. However, the C15 has a notch at the base designed for plugging into C16 inlets and can also fit C14 installs, while the C13 will only fit C14 inlet. Male plug inserts into a...
Large range of Kettle Extension Power Cables are available next day from our local stock. C19 - C20 IEC cables are available in 7x different lengths. These are commonly used to either extend an existing C19 - C20 power cable, or to connect directly from a Power Distribution Unit (PDU) or UPS to any active hardware and server equipment with C19 outlets.
Large range of Kettle Extension Power Cables are available next day from our local stock. C19 - C20 IEC cables are available in 7x different lengths. These are commonly used to either extend an existing C19 - C20 power cable, or to connect directly from a Power Distribution Unit (PDU) or UPS to any active hardware and server equipment with C19 outlets.
Large range of Kettle Extension Power Cables are available next day from our local stock. C19 - C20 IEC cables are available in 7x different lengths. These are commonly used to either extend an existing C19 - C20 power cable, or to connect directly from a Power Distribution Unit (PDU) or UPS to any active hardware and server equipment with C19 outlets.
IEC C14 to UK socket cables allow for connection of a UK plug to a C13 PDU (power distribution unit) or UPS (uninterruptible power supply)
IEC 60320 tolerances are wide so the stability of a connection can be inadvertently separated. When mounting IEC320 C14 plug into an IEC320 C13 outlet the C14 Secure Sleeve Tab over-mold insert will make the connection stronger.
The C14 to 2x C13 splitter adaptors provide a convenient solution for powering multiple devices from a single power source. These adaptors are compatible with PDU and UPS systems and can be used with IEC power extensions as well.