Dimensions (WxDxH) 12.1 cm x 11.4 cm x 3.8 cm Weight 80 g Form Factor Plug-in module Interface (Bus) Type SmartSlot Ports 10/100 Ethernet Cabling Type Ethernet 10Base-T,Ethernet 100Base-TX Data Transfer Rate 100 Mbps Data Link Protocol 10Mb LAN,100Mb LAN
The M210 Portable Label Printer is an all-in-one labeller for voice/datacom, electrical and general industrial teams. Offering drop-lock-and-go cartridges, plus a rechargeable Lithium-ion battery, plus protective rubber bumpers, plus a two year warranty adds up to the brains and brawn needed to take on the day-to-day rigours of any job.
All our 305 Metre Solid Network Cable is supplied in Reelex 'Pull Box' Packaging for easy installation without snags, tangles, twists and over runs. Our Velocity Premium range is available as Cat5e, Cat6 and Cat6a in PVC, LSZH and External PE variants, with UTP and FTP options. Colours include Grey, Green, Red, Blue, Yellow, Black, Orange, Purple and...
The POE-173 is a Single-Port, Ultra Power over Ethernet Injector with maximum up to 60 watts of power output over Ethernet cables.It is designed specifically to fill the demand of growing higher power required network equipment such as: PTZ Speed Dome AIO(All-in-One) touch PC Remote digital signage display Other Network devices that need higher power to...
A huge range of PDU's available for next day delivery from Patchsave Solutions. These include UK, C13 and C19 sockets in both Horizontal and Vertical rack mount configurations. Supplied with your choice of 3 Metre trailing power lead to a UK, C14, C20 or Commando Type Plug. *Please note some PDU's many need to be made before shipping*
1U 19” fully loaded LC fibre optic patch panels are suitable for spliced or direct fibre terminations. Finished in a scratch resistant black powder coating, plastic push clips which enable easy access to the fully extending sliding panel tray and allows hands free access to the fibre terminations.
Easy installation coupler Cat5e Patch Panel, justs plug in patch cables, no need to punch down.
SFP-H10GB-CU0.5M Cisco compatible 10G Twinax Direct Attached Cables (DAC) by Flexoptix
Patented Velcro Brand One-Wrap self-engaging back-to-back tape. Ideal for cable & cord management. Easy, adjustable and re-usable.
Patchsee PatchClips are compatible with all Patchsee Cat5e, Cat6 & Cat6a Intelligent Patch Cords across both their UTP and FTP ranges. They are easy to install and remove so an ideal choice for first level identification across the Patchsee range.
2u Letterbox brush panels enable neat routing of cables form the front to rear of data cabinets, helping with air-flow and preventing hot air from re-circulating.
Large range of Extension Power Cables are available next day from our local stock. IEC320 C13 to C14 V-Lock power cables. Prevent inadvertent disconnects by securing C13 and C14 connectors to outlet when the PDU contains the corresponding notched outlets. Most Schneider APC, Panduit, Enlogic, and NextGen HP PDUs are fitted with these outlets.
Cat5e Certified 26Awg - 100% Copper! Flush Moulded Low Profile Boot Economy shipping service available for this product Popular choice across both Public and Private Sector clients Available in up to 5x colours and 5x different lengths
Dubbed "SuperSpeed USB", USB 3.0 promises a major leap forward in transfer speeds and capability, while maintaining backwards compatibility with USB 2.0 devices.
Cat5e Certified 30Awg - 100% Copper! Small Slimline Boot Economy shipping service available for this product Popular choice across both Public and Private Sector clients
Available in Black, Neutral, Blue, Orange, Red, Purple, Yellow and Green.
Available in Black, Neutral, Blue, Orange, Red, Purple, Yellow and Green.
Available in Black, Neutral, Blue, Orange, Red, Purple, Yellow and Green.
The USB2.0 A (male) to B (male) cables are used to connect devices such as a printer or scanner to a PC.
Coloured RJ45 Snagless Boots allow for easy idendification of networking cables. Suitable for use with Cat5e & Cat6 cable with an overall diametre of up to 6.5mm