Dimensions (WxDxH) 12.1 cm x 11.4 cm x 3.8 cm Weight 80 g Form Factor Plug-in module Interface (Bus) Type SmartSlot Ports 10/100 Ethernet Cabling Type Ethernet 10Base-T,Ethernet 100Base-TX Data Transfer Rate 100 Mbps Data Link Protocol 10Mb LAN,100Mb LAN
The M210 Portable Label Printer is an all-in-one labeller for voice/datacom, electrical and general industrial teams. Offering drop-lock-and-go cartridges, plus a rechargeable Lithium-ion battery, plus protective rubber bumpers, plus a two year warranty adds up to the brains and brawn needed to take on the day-to-day rigours of any job.
All our 305 Metre Solid Network Cable is supplied in Reelex 'Pull Box' Packaging for easy installation without snags, tangles, twists and over runs. Our Velocity Premium range is available as Cat5e, Cat6 and Cat6a in PVC, LSZH and External PE variants, with UTP and FTP options. Colours include Grey, Green, Red, Blue, Yellow, Black, Orange, Purple and...
As more and more PoE PD devices need higher power input and long-distance transmission, PLANET has released a new Power over Ethernet Media Converter, GTP-80x series. IEEE 802.3at / IEEE 802.3af PoE standard compliance Supports a maximum of 30W output power 10/100/1000Mbps duplex mode supports on 1000Base-T port 1000Mbps Fiber-Optic support
The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.
The POE-173 is a Single-Port, Ultra Power over Ethernet Injector with maximum up to 60 watts of power output over Ethernet cables.It is designed specifically to fill the demand of growing higher power required network equipment such as: PTZ Speed Dome AIO(All-in-One) touch PC Remote digital signage display Other Network devices that need higher power to...
1U 19” fully loaded LC fibre optic patch panels are suitable for spliced or direct fibre terminations. Finished in a scratch resistant black powder coating, plastic push clips which enable easy access to the fully extending sliding panel tray and allows hands free access to the fibre terminations.
Get a grip on your wire and cable identification – Brady and VELCRO® Brand have partnered to bring you BradyGrip™ Print-on Hook Material, an exclusive print-and-place material that can be easily applied, repositioned or removed. For use with BMP21-PLUS label printer
Easy installation coupler Cat5e Patch Panel, justs plug in patch cables, no need to punch down.
Express, Easy and Expandable MPO Fibre Solutions. OM4 (OM3 Compatible) Micro/Multi Fibre Trunk Cable with 4x LC Duplex Fan Out. Rapid 'Plug and Go' Fibre Network Deployment with no specialist tools required. Manufactured and ready to ship today. Trunk Cable to link active equipment directly.
Complete with Cage nuts, cable ties and pre-printed number lables.
This LSZH (Low Smoke Zero Halogen) braided sleeving is a proven solution for strengthening, protecting and bundling cables. Available in 2 sizes: 2mm - 7mm (10mm Flat) 5mm - 12mm (18mm Flat)
SFP-H10GB-CU0.5M Cisco compatible 10G Twinax Direct Attached Cables (DAC) by Flexoptix
IEC 60320 tolerances are wide so the stability of a connection can be inadvertently separated. When mounting IEC320 C14 plug into an IEC320 C13 outlet the C14 Secure Sleeve Tab over-mold insert will make the connection stronger.
IEC 60320 tolerances are wide so the stability of a connection can be inadvertently separated. When mounting IEC320 C20 plug into an IEC320 C19 outlet the C20 Secure Sleeve Tab over-mold insert will make the connection stronger.
When C14 inlet is mounted in a piece of equipment take care not to damage the inlet when removing the connector. To remove SecureSleeve that remains in inlet after cord extraction turn off power source and use Non-conductive tool to extract.
RJ45 Jack Locks provide extra physical network security. Available in Red, Green, Yellow and White, each with their own proprietary type of key. Prevent tampering and damage to your network ports. Popular product within retail POS environments, Schools, Government and Conference Rooms. Available for immediate next day delivery.
Patchsee PatchClips are compatible with all Patchsee Cat5e, Cat6 & Cat6a Intelligent Patch Cords across both their UTP and FTP ranges. They are easy to install and remove so an ideal choice for first level identification across the Patchsee range.
Patchsee PatchClips are compatible with all Patchsee Cat5e, Cat6 & Cat6a Intelligent Patch Cords across both their UTP and FTP ranges. They are easy to install and remove so an ideal choice for first level identification across the Patchsee range.
Patchsee PatchClips are compatible with all Patchsee Cat5e, Cat6 & Cat6a Intelligent Patch Cords across both their UTP and FTP ranges. They are easy to install and remove so an ideal choice for first level identification across the Patchsee range.
This ratchet controlled crimp tool has a black carbon steel frame and plastic covered handles and is suitable for RJ45 & RJ11 ethernet network patch lead connectors.
Patented Velcro Brand One-Wrap self-engaging back-to-back tape. Ideal for cable & cord management. Easy, adjustable and re-usable.
2u Letterbox brush panels enable neat routing of cables form the front to rear of data cabinets, helping with air-flow and preventing hot air from re-circulating.
Large range of Kettle Extension Power Cables are available next day from our local stock. IEC320 C19 to C20 P-Lock power cable help prevent inadvertent disconnects by securing a C20 to the C19 outlet when the PDU contains the corresponding notched outlets. Most ServerTech, Raritan, Vertiv, Knurr, and NextGen Eaton PDUs are fitted with these outlets.
Large range of Kettle Extension Power Cables are available next day from our local stock. IEC320 C19 to C20 P-Lock power cable help prevent inadvertent disconnects by securing a C20 to the C19 outlet when the PDU contains the corresponding notched outlets. Most ServerTech, Raritan, Vertiv, Knurr, and NextGen Eaton PDUs are fitted with these outlets.
IEC 60320 tolerances are wide so the stability of a connection can be inadvertently separated. When mounting IEC320 C20 plug into an IEC320 C19 outlet the C20 Secure Sleeve Tab over-mold insert will make the connection stronger.
When C20 inlet is mounted in a piece of equipment take care not to damage the inlet when removing the connector. To remove SecureSleeve that remains in inlet after cord extraction turn off power source and use Non-conductive tool to extract.
Colour = Black smooth semi-gloss powder coat finish
This Premium range of HDMI cables are ready for today’s Ultra HD products that include features such as 4K 60Hz, BT.2020 and HDR.
Large range of UK Mains Plug to IEC Power Cables are available next day from our local stock. IEC C13 Splitter - UK 13 Amp Plug cables are available in 3x different sizes. These are commonly used to connect directly from a UK Mains socket to 2x different hardware appliances from the same power source.
Fibre 'One Price' - Exclusively from Patchsave Solutions One single price per length no matter what Termination or Colour on all OM1 Fibre Cables! Buying in BULK? Check out our 'Quantity Pricing' for even bigger savings! We stock all Single & MultiMode Duplex Fibre Patch Leads for immediate next day delivery. *Largest Duplex Fibre selection in UK*
Large range of Kettle Extension Power Cables are available next day from our local stock. C13 - C14 IEC Angled Cables are available in both Black and Red, with combinations of left and right angled plugs and connectors in various types and lengths. These are commonly used to either extend an existing C13 - C14 power cord, or to connect directly from a...
Dubbed "SuperSpeed USB", USB 3.0 promises a major leap forward in transfer speeds and capability, while maintaining backwards compatibility with USB 2.0 devices.
Cable Tie Cradle style design provides a secure fixing for securing Nylon Cable Ties. Two sizes available: 5mm for cable ties up to 5mm width 9mm for cable ties up to 9mm width
Cat5e Certified 30Awg - 100% Copper! Small Slimline Boot Economy shipping service available for this product Popular choice across both Public and Private Sector clients
Colour = WhiteType = BT Plug to Double BT SocketsStock = Available for Next Day Delivery
Available in Black, Neutral, Blue, Orange, Red, Purple, Yellow and Green.
Available in Black, Neutral, Blue, Orange, Red, Purple, Yellow and Green.
Available in Black, Neutral, Blue, Orange, Red, Purple, Yellow and Green.
USB 2.0 type A to micro B male for use with many portable devices, such as digital camers and mobile phones. *Please note this is not compatible with the USB mini B connectors.*
The USB2.0 A (male) to B (male) cables are used to connect devices such as a printer or scanner to a PC.
These Cat6a FTP keystone modules easily click into place on our 48 port unloaded patch panels.
USB 2.0 Extension cable in various lengths, used to extend existing USB 2.0 cables.
Coloured RJ45 Snagless Boots allow for easy idendification of networking cables. Suitable for use with Cat5e & Cat6 cable with an overall diametre of up to 6.5mm