These Additional Smart Plugs work in-conjunction with the Patch App & Go Data Continuity Tester and Cable Tracer.
Are you looking to bulk purchase this product? If so, please see the below DISCOUNTED quantity breaks!
All quoted prices exclude VAT.
|15||20%||Up to £200.01|
|10||15%||Up to £100.01|
|5||10%||Up to £33.34|
|3||5%||Up to £10.00|
Type = Suitable for all RJ45 Cat5e, Cat6 and Cat6a systems
Stock = Next Day from Stock
|As you test the Patch App & Go will visually display a pass or fail, as well as confirming the unique ID of the smart plug currently being tested.|
|The Patch App & Go T1 is suitable for testing Cat 5e, Cat 6, Cat 6A, unshielded and shielded network cables. As the device performs each test the results will appear as a pass or fail on your mobile device. When a fail is reported, the app will instantly display errors such as mis-wires, split pairs, shorts and open ends.|
|Patch App & Go can be used to trace unidentified or unlabelled data ports. By inserting the Smart Remote Plugs into the ports of the Patch Panel, Patch App & Go will send a trace from the Wall outlet, through the data cable to the uniquely numbered Smart Remote Plug, activating its LED and displaying the plugs ID on the app.|
Access 4x quantity breaks against this product for even bigger discounts when ordering a larger quantity.
Local stock item available for next day delivery, spend over £85 and receive FOC delivery.
|Patchsave Solutions - The Data Centre Difference for Choice, Quality and Innovation - please call 0845 365 7777 or email firstname.lastname@example.org for pricing and full specification.|