Cisco compatible USB Type A to RJ45 Console Cable.
DisplayPort is a new generation display interface technology. With this connector, notebooks and consumer electronic devices can be connected with big display screens.
HDMI to VGA adapter converts a HDMI signal into a VGA signal with output for 3.5mm stereo.
RJ45 patch cable tester can be used to check wiring pinouts on RJ45 patch cables, or for testing wall ports and patch panel wiring in structured buildings using the included remote unit. Please note that this tester is only a continuity tester and does not test a cable or installation for speed, it is not recommend that either of the units are attached to...
Panduit identification sleeves are the easy to use solution to help identify Fibre Cables. The Fibre Cable is simply inserted in to the flexible PVC sleeve which provides a large labelling surface on which a sticky label can be fixed allowing small cables legends to be clearly seen. Available in White 3mm Duplex Yellow 2mm Simplex Aqua 2mm Simplex Orange...
Panduit identification sleeves are the easy to use solution to help identify Fibre Cables. The Fibre Cable is simply inserted in to the flexible PVC sleeve which provides a large labelling surface on which a sticky label can be fixed allowing small cables legends to be clearly seen. Available in White 3mm Duplex Yellow 2mm Simplex Aqua 2mm Simplex Orange...
Panduit identification sleeves are the easy to use solution to help identify Fibre Cables. The Fibre Cable is simply inserted in to the flexible PVC sleeve which provides a large labelling surface on which a sticky label can be fixed allowing small cables legends to be clearly seen. Available in White 3mm Duplex Yellow 2mm Simplex Aqua 2mm Simplex Orange...
Panduit identification sleeves are the easy to use solution to help identify Fibre Cables. The Fibre Cable is simply inserted in to the flexible PVC sleeve which provides a large labelling surface on which a sticky label can be fixed allowing small cables legends to be clearly seen. Available in White 3mm Duplex Yellow 2mm Simplex Aqua 2mm Simplex Orange...
This ratchet controlled crimp tool has a black carbon steel frame and plastic covered handles and is suitable for RJ45 & RJ11 ethernet network patch lead connectors.
Black cantilever shelf, designed to fit standard 19" wide wall mounted switch cabinets. 1U, 350mm deep with vent holes to improve air circulation to aid cooling of equipment.
Self Adhesive Cable Bases - ideal for securing/routing fibre or other lightweight cables in to cabinets and racks.
Both 16Amp & 32Amp Commando IEC309 Cables are available from Patchsave. They are commonly used to connect directly from Commando Female connectors that provide power to IT racks and directly in to UPS systems.
DisplayPort is a new generation display interface technology. With this connector, notebooks and consumer electronic devices can be connected with big display screens.
Connect your USB-C device to your DVI monitor, projector or Television. Compatible with the latest MacBooks, Chromebooks, mobile phones and any other device that has a USB Type C output. Available in 1, 2, 3 and 5mtr lengths
The modular feature of the EziBlank® 6RU Blanking Panels makes it the perfect server rack accessory for data centre operators where separated panels can be installed and reused onto different RU heights of unused space.
OM4 LC Ruggedized Flat Twin Patch Cables for critical installations. 9x Stocked options, available immediately in UK Stock from 5 Metre to 50 Metre lengths. Each cable is individually tested and then bagged with test results. Popular LC - LC termination for panel to panel or panel to switch fibre patching.
USB-C connection to HDMI (high definition multimedia interface) Supports resolution up to 4k @ 60Hz. Available in 1, 2, 3 and 5mtr lengths.
This adaptor allows you to transmit signals from a Type-C source to a high definition DVI or HDMI or VGA display (TV sets, projectors, etc).
These 19" wall brackets, with 1 hinged mounting profile include cable access points through the back and side of the frame. Available in 4 sizes 2u = 490mm (w) x 300mm (d) x 90mm (h) 3u = 490mm (w) x 300mm (d) x 135mm (h) 4u = 490mm (w) x 300mm (d) x 180mm (h) 6u = 490mm (w) x 300mm (d) x 270mm (h)
The tester is a small hand-held cable tester, which enables network professionals to quickly and easily verify the integrity of ethernet twisted pair cables.
Unshielded 2 part RJ45 Crimp plug that can be terminated with generic RJ45 crimping tools. Utilising a staggered transparent load bar to maintain pair separation and to offer a consistent level of performance.
1U 19” Un-loaded SC fibre optic patch panel for Singlemode or Multimode SC adaptors. Finished in a scratch resistant black powder coating with plastic push clips which enable easy access to the fully extending sliding panel tray and allows hands free access to the fibre terminations