Our range of cutting, stripping, crimping and testing tools has everything needed for RJ45, RJ11 & RJ10 structured cabling installations.
Our range of cutting, stripping, crimping and testing tools has everything needed for RJ45, RJ11 & RJ10 structured cabling installations.
Flame retardant PVC electrical tape, useful for bundling networking cables during installations.
Economy tool for Krone style blocks used to install wires easily into a telephone socket, faceplates or RJ45 patch panels.
Adjustable Pressure Punchdown Tool with Reversible Blade for Punching and Cutting or just Punch Down.
This Universal Cable Stripper/Cutter is suitable for stripping round cable (UTP & STP), flat wire, stranded wire and multi-conductor cable between 3mm and 9mm.
Easily cut, strip & crimp RJ45 & RJ11 cables with one tool. Suitable for use with Cat5e, Cat6 & Cat6a UTP & STP cable.
This economy stripping and RJ45 insertion tool are for inserting wires and stripping outer sheath jackets from RJ45 network cables including Shielded Twisted Pairs (STP) & Un-Twisted Pairs (UTP)
Designed for fine assemble and adjustment operations on electronic circuits.
The cable tester can test RJ45 and various combinations of RJ11 cables. Tests RJ45 UTP & STP cables Tests RJ11 (2, 4, 6 or 8 pin) cables Tests open, short, crossed, split, reversed and non-paired wiring
RJ45 patch cable tester can be used to check wiring pinouts on RJ45 patch cables, or for testing wall ports and patch panel wiring in structured buildings using the included remote unit. Please note that this tester is only a continuity tester and does not test a cable or installation for speed, it is not recommend that either of the units are attached to...
This ratchet controlled crimp tool has a black carbon steel frame and plastic covered handles and is suitable for RJ45 & RJ11 ethernet network patch lead connectors.
Cutting and triming fibre could not be easier with these super sharp kevlar scissors.
High quality Cage Nut Insertion & Removal Tool to save time.
The tester is a small hand-held cable tester, which enables network professionals to quickly and easily verify the integrity of ethernet twisted pair cables.
This non-ratchet crimp tool is suitable for RJ45 (8P8C), RJ12 (6P6C), RJ11 (6P4C), 4P4C & 4P2C Crimp Plugs.
This high quality ratchet controlled crimp tool has a black carbon steel frame with shape moulded handles and is suitable for RJ45 & RJ11 ethernet network patch lead connectors.
Cleans adapter mounted 2.5mm SC/ST/FC Adapters & Ferrules One action cleaning system, effective with a variety of contaminants. Over 800 cleanings per unit.
Cleans adapter mounted MU's & LC's One action cleaning system, effective with a variety of contaminants. Over 800 cleanings per unit.
This Non-Ratchet Crimp Tool is suitable for Large 8mm OD Cat6a RJ45 FTP Plugs.
Allows one person to measure up to 12m/40ft without assistance. Intuitively designed toggle button features three measuring modes: length, area, and volume. LCD displays last three measurements for quick reference.
The remote continuiity cable tester can be used to verify the condition of cables before and after installation. LEDs give a clear indication of: Connected wires Open/short wiring Wrong connection/non-parallel connection No conect/no termination
Ratchet Type Trunking Cutter with strong die-cast aluminium body for cutting up to 42mm.
The Hobbes all in one cable crimper, stripper & cutting tool tests both UTP & STP patch cables. Crimps 8P8C (RJ45), 6P6C (RJ12), 6P4C (RJ11) Modular Plugs
The Data Table is ergonomically designed to improve comfort and productivity for cabling installers / technicians working on site.